manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 208 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 208

196

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

•

Ignition Control/Ignition On - When either Ignition Control option has been selected 
for the Power Configuration mode and the Ignition Switch is On, this Power Scheme 
is selected. Because of the presence of external power, this Power Scheme has longer 
timeout values.

•

Ignition Control/Ignition Off - When either Ignition Control option has been selected 
for the Power Configuration mode and the Ignition Switch is Off, this Power Scheme 
is selected. This Power Scheme has shorter timeout values (compared to Ignition On) 
to preserve the vehicle battery.

•

Auto-On - When Auto-On has been selected for the Power Configuration mode, this 
Power Scheme is selected. Because of the presence of external power, this Power 
Scheme has longer timeout values.

•

UPS - When any Power Configuration Mode is selected but no external power is 
present, the UPS Power Scheme is used. This Power Scheme has much shorter 
timeout values designed to shut down the Thor VM3 before the UPS battery is 
depleted.

Because of the cumulative effect, if the Thor VM3 is operating from the UPS, for exam-
ple:

•

The backlight turns off after 30 seconds of no activity,

•

The display turns off after 1 minute and 30 seconds of no activity (30 sec + 1 min),

•

The Thor VM3 enters Suspend after 11 minutes and 30 seconds of no activity.

•

The Thor VM3 shuts down after 31 minutes and 30 seconds of no activity.

•

If the User Idle timer is set to Never, the power scheme timers never place the Thor 
VM3 in User Idle, System Idle or Suspend modes.

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов