manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 358 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 358

346

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

      2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original 
software.

      3. This notice may not be removed or altered from any source distribution.

BZIP2 LICENSE

-------------

This program, "bzip2" and associated library "libbzip2", are copyright (C) 1996-2000 Julian R Seward. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met:

      1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following 
disclaimer.

    

      2. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If 
you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not 
required.

      3. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original 
software.

      4. The name of the author may not be used to endorse or promote products derived from this software without specific 
prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

Julian Seward, Cambridge, UK.

[email protected]

COMMON PUBLIC LICENSE VERSION 1.0

---------------------------------

THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS COMMON PUBLIC LICENSE 
("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S 
ACCEPTANCE OF THIS AGREEMENT.

1. DEFINITIONS

"Contribution" means:

      a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and

      b) in the case of each subsequent Contributor:

      i) changes to the Program, and

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов