Honeywell Thor VM3 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 33

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

21

Press the power button to turn the Thor VM3 on. When the Windows desktop is dis-
played or an application begins, the power up sequence is complete.

After initial power on, the Thor VM3 can be configured to automatically power on. See

for more information.

Rebooting the Thor VM3

Warmboot

A warmboot reboots the Thor VM3 without erasing any registry data. Configuration set-
tings and data in RAM are preserved during a warmboot. Network sessions are lost and
any data in running applications that has not been previously saved may be lost. CAB
files already installed remain installed.

There are several warmboot methods available:

•

Using the Registry, select

Start > Settings > Control Panel > Registry

and tap the

Warmboot

button. The Thor VM3 immediately warmboots.

•

Using the Start menu, select

Start > Run

and type WARMBOOT in the text box. Press

Enter. The Thor VM3 immediately warmboots. The WARMBOOT text command is not
case-sensitive.

•

Use the

P1 + P7 + Orange

key press sequence to reboot the Thor VM3. The keys must

be pressed in sequence; they do not need to be held down simultaneously.

If a USB drive, such as a thumb drive is attached to the Thor VM3, the device
attempts to boot from the USB drive:

•

If the USB drive contains a bootable sector, the Thor VM3 boots from the
USB drive.

•

If the USB drive does not contain a bootable sector, the Thor VM3 does
not boot. Remove the USB drive and boot the Thor VM3 again.

«
...
31
32
33
34
35
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов