manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 143 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 143

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

131

6. Carefully lift the front panel away from the device.

7. Position the replacement front panel so wiring connector on the back of the front 

panel lines up with the connector on the Thor VM3.

8. Gently press the front panel into place.

9. Tighten the sixteen (16) captive M3 screws. In the order shown in the top figure 

above, use a #2 Phillips bit and torque the screws to 7 ± 0.5 inch pounds.

10. Reinstall the Thor VM3 in the dock.

11. When the Thor VM3 is placed in the powered dock, the UPS battery automatically 

reconnects.

12. Restart the Thor VM3.

13. If adding or removing a defroster, update the Thor VM3 configuration by selecting 

Start > Settings > Control Panel > Peripherals

 and tap the 

Test

 button.

14. Close any open control panel windows.

15. Perform a touch screen 

Calibration

.

16. The Thor VM3 is ready for use.

Wiring Connector
 on Thor VM3

Wiring Connector
 on Front Panel

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов