Honeywell Thor VM3 Скачать руководство пользователя страница 212 | Manualshive

Страница: 212 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 212

200

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

•

Thor VM3 is already mounted to a dock and external power is applied to the dock

•

Thor VM3 is already mounted to a dock and the dock power switch is turned On

Result

The Thor VM3 continues to run and follows the Auto-On power scheme with timers
reset at the time power was connected.

UPS Mode

This mode is selected any time external power is not present, regardless of selected
Power Configuration. Ignition Input is ignored.

Thor VM3 is Off

Conditions

•

The Thor VM3 is Off and the power button is pressed the Thor VM3 and both the
following conditions are met:

•

UPS power is over 10% capacity

•

CPU temperature is over 20ºC

Result

The Thor VM3 boots and follows the UPS power scheme with power management tim-
ers reset at boot up.

Conditions

The Thor VM3 is Off and the power button is pressed the Thor VM3 and at least one of
the following conditions are met:

•

UPS power is under 10% capacity

•

CPU temperature is under 20ºC

Results

The Thor VM3 remains Off.

Thor VM3 is On

Conditions

The Thor VM3 is On and external power is removed, such as:

•

Thor VM3 is removed from a powered dock (Dock power switch On)

•

Thor VM3 is mounted to a dock and truck power is removed from the dock

•

Thor VM3 is mounted to a dock and the dock power switch is turned Off

Result

The Thor VM3 continues to run and follows the UPS mode power scheme with power
management timers reset at the time of power removal. UPS charging is disabled.

«
...
210
211
212
213
214
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов