Honeywell Thor VM3 Скачать руководство пользователя страница 71

Страница: 71 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

1. Determine the position for mounting the RAM ball base. Be sure to position the RAM

bracket to allow access to the switches and ports on the bottom of the Thor VM3.

2. Attach the RAM ball base to the vehicle mounting surface using three or four 1/4

bolts (not included) or equivalent fasteners. If the mounting kit includes cone
washers, use those as illustrated below.

IMPORTANT

: Mount to the most rigid surface available.

Mounting Dimensions

Note:

Drill and tap holes for three 1/4 bolts. Drawing not to scale.

120º

60º

2.75" / 69.85 mm

3.69" / 93.73 mm

Содержание Thor VM3



























































































































































































































































































































































































Результаты поиска

Содержание Thor VM3

Отзывы:

Honeywell Thor VM3, Руководство пользователя, Страница: 71 / 378

Результаты поиска

Содержание Thor VM3

Отзывы: