manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 209 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 209

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

197

Power Configuration Mode

Start > Settings > Control Panel > Power Configuration Mode

There are three user selectable power configuration modes for the Thor VM3 available. 
Additionally a UPS power configuration mode is supported and automatically selected 
regardless of the user selected mode any time external power is not present.

Power

 control panel timeout values vary by the power configuration mode selected.

AC/DC Mode

This is the default power mode. In AC/DC mode the Thor VM3 is turned On when power 
is connected. Ignition input is ignored when AC/DC Mode is enabled.

Note:

When the UPS battery has been depleted or disconnected (the Thor VM3 is first powered 
out of the box, the front panel has been replaced, etc.) power the Thor VM3 manually by 
pressing the power button. After the initial power up, the Thor VM3 powers on 
automatically when power is attached and AC/DC mode is selected.

Note:

When AC/DC is used to power the Thor VM3 on automatically the 

Wakeup Timer

 must be 

enabled.

Thor VM3 is Off

Conditions

The Thor VM3 is Off and gets external power, such as

•

Thor VM3 is installed on a powered dock with the dock power switch On

•

Thor VM3 is already mounted to a dock and external power is applied to the dock

•

Thor VM3 is already mounted to a dock and the dock power switch is turned On

Result

The Thor VM3 boots. Once booted the Thor VM3 follows the AC/DC power scheme with 
timers reset after the boot completes.

Thor VM3 is On

Conditions

The Thor VM3 is On and gets external power, such as

•

Thor VM3 is installed on a powered dock with the dock power switch On

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов