Honeywell Thor VM3 Скачать руководство пользователя страница 79

Страница: 79 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Step 7 - Attach Numeric Keypad (Optional)

This step is only for use with the Enhanced Dock.

1. Attach the accessory RAM ball to the Enhanced Dock. There are two mounting provi-

sions, one on either side of the Enhanced Dock and either can be used to mount the
numeric keypad.

Note:

Some components eliminated for detail clarity.

2. Attach the RAM ball to the back of the keypad.

3. Slip the RAM arm over the accessory RAM ball.

4. Slip the RAM ball on the keyboard into the RAM arm.

5. Tighten the knob on the RAM arm while adjusting to the desired angle.

Содержание Thor VM3



























































































































































































































































































































































































Результаты поиска

Содержание Thor VM3

Отзывы:

Honeywell Thor VM3, Руководство пользователя, Страница: 79 / 378

Результаты поиска

Содержание Thor VM3

Отзывы: