Honeywell Thor VM3 Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 140

128

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

6. Locate the SIM card holders. The

VM3 WWAN Connection Manager

identifies the top slot (the slot closest to the top of the Thor VM3 as
slot 1 (SIM 1) and the lower slot as slot 2 (SIM 2).

Note:

If an mSATA drive has been installed, it is necessary to remove the drive before installing
the SIM card(s).

7. Slide the silver retainer clip toward the center of the Thor VM3.

8. After the clip is slid in, lift the outer edge of the SIM holder so it is at a 45º to 90º

angle (compared to the circuit board on which it is mounted).

9. Insert the SIM card into the SIM holder.

Note:

The SIM card does not have a “spring lock” type holder. Slide the SIM card into the holder
but do not push it expecting it to lock into place. The SIM card will be held in place when
the card holder is closed.

10. Lower the SIM holder to back to its flat position.

11. Slide the silver retainer clip back toward the outside edge of the Thor VM3. This locks

the SIM card in place.

12. Reattach the access panel, torquing the screws to 7.0 ± 0.5 inch pounds.

13. Reinstall the Thor VM3 in the dock.

14. Resume the Thor VM3 from Suspend.

SIM

«
...
138
139
140
141
142
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов