Honeywell Thor VM3, Руководство пользователя, Страница: 171 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide 159
Manual Connect
1. Select Bluetooth Scanning from the Control Panel (either large or small icon view
option must be selected).
2. Tap Add Device .
3. Select Manual .
4. Tap Next .
5. Enter the MAC address of the Bluetooth scanner.
6. Tap Next .
Troubleshooting
• The Honeywell Xenon 1902 Bluetooth scanner does not work with Quick Connect. It
must be connected using the Search or Manual options.
• Make sure the scanner is in the correct mode. Bar codes to set the mode can be found
in the manual provided with the Bluetooth scanner.
• The scanner must be a master device to use the Quick Connect option.
• The scanner must be a slave device to use the Search or Manual option.
• The Motorola/Symbol LS3578 family of scanners may not support the Quick
Connect feature (depending on firmware installed). If Quick Connect does not work,
use the other options to connect these scanners.
• If the Honeywell Granit 1911i and Granit 1981i scanners cannot be found with the
Search option, scan the
PDAs/Mobility Systems Devices bar code from the scanner
manual and search again.
• If the Honeywell Granit 1911i and Granit 1981i scanners cannot connect using the
manual option, scan the
PDAs/Mobility Systems Devices bar code from the
scanner manual then repeat the manual add process again.
• If the Honeywell Granit 1911i and Granit 1981i scanners are not removed after using
the Remove option, the auto-reconnect option is enabled on the Granit scanner (this
is the default option). To remove the scanner:
• Scan the disable auto-reconnect bar code from the Granit scanner manual then
tap Remove , or
• Scan BT_RMV to unlink and disconnect the scanner the tap Remove .
• If a Honeywell/LXE ring scanner is not connecting, scan the Restore Factory
Defaults bar code in the scanner manual and try connecting again.