Honeywell Thor VM3, Руководство пользователя, Страница: 38 / 378

26 Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Video Subsystem
The Thor VM3 video subsystem consists of a color TFT display. The video subsystem
complies with the VESA VL bus standard. The resolution of this display is 800 x 600 or
1024 x 768 pixels. This resolution complies with the SVGA graphics industry standard.
The display supports screen blanking to eliminate driver distraction when the vehicle is
in motion.
Audio Interface
Speakers are located on the bottom front of the Thor VM3. A headset adapter cable pro-
vides a connection for headset operation. When a headset is plugged into the adapter
cable, the main speakers are disabled.
A microphone is located at the upper right of the Thor VM3 display, near the Thor VM3
emblem. When a headset is plugged into the adapter cable, the internal microphone is
disabled.
Card Slots
mSATA Slots
There are two mSATA slots. The lower slot contains an mSATA card loaded with the oper-
ating system.
The upper slot is available for a user installable mSATA card for storage expansion.
Bluetooth
The Thor VM3 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0
Mbit/s over the air. Bluetooth device connection (or pairing) can occur at distances up
to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless connectivity
while Bluetooth is active.
The user cannot select PIN authentication or encryption on connections from the Thor
VM3. However, the Thor VM3 supports authentication requests from pairing devices. If
a pairing device requests authentication or encryption, the Thor VM3 displays a prompt
for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the
length of the user’s passcode.
Bluetooth simultaneously supports one printer as a slave Bluetooth device and one
scanner, either as a slave or as a master Bluetooth device.
• The LED on the Bluetooth scanner illuminates during a scanning operation.
• Multiple beeps may be heard during a bar code scan using a mobile Bluetooth
scanner. The mobile Bluetooth scanner may beep as the bar code data is accepted/
rejected and the Thor VM3 may beep during final bar code data manipulation.