manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 139 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 139

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

127

Install SIM Card(s)

The Thor VM3 supports two SIM cards for WWAN switching. The Thor VM3 can switch 
between carriers, but the WWAN connection is lost during this switch as the first carrier 
must be disconnected before the second carrier can be connected. See 

VM3 WWAN 

Connection Manager

 for software configuration.

Note:

The SIM card is not hot-swappable. After installing or removing a SIM card, the Thor VM3 
must be rebooted for the change to take effect.

Equipment Required

The following equipment is user-supplied:

•

SIM card(s) for desired carrier(s)

•

Torquing tool capable of measuring inch pounds

•

#2 Phillips screwdriver bit

Installation Procedure

1. Place the Thor VM3 in Suspend by pressing the Power button.

2. Remove the Thor VM3 from the 

dock.

3.

Disconnect UPS Battery

.

4. Place the Thor VM3 face down on 

a stable surface.

5. Use a #2 Phillips bit to loosen the 

captive M3 screws on the access 
panel with the mSATA and SIM 
labels. This panel is on the right 
hand side when the Thor VM3 is 
face down with the top away from 
the user.

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов