manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 132 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 132

120

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

WAN Remote Mount Antenna

The WAN remote mount antenna can be either a magnetic mount or an adhesive mount 
antenna.

The Remote Antenna Installation Kit consists of the WAN antenna and an extension 
cable. The remote antenna is mounted on the top of a forklift, truck or other vehicle and 
cabled to the Thor VM3 inside the vehicle.

1. Locate a mounting position on highest point on the vehicle, following these precau-

tions:

•

The antenna must be mounted so the antenna is not damaged while the vehicle 
or any of its parts are moving.

2. Clean the area where the antenna is to be mounted.

3. If using an adhesive mount antenna, remove the protective backing paper from the 

adhesive on the antenna.

4. Position the antenna on the vehicle.

5. Attach the one end of the coaxial cable to the antenna and the other end to the 

Mobile Net WWAN connector on the vehicle mounted Thor VM3.

6. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the 

cable is routed so it is not damaged by any moving parts of the vehicle.

Magnetic Mount WAN Antenna

Adhesive Mount WAN Antenna

To extension cable

To antenna

To antenna
connector on
computer

To extension cable

To antenna

To antenna 
connector on
computer

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов