manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 129 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 129

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

117

Connect CANbus Cable

The CANbus/Audio connector supports a headset adapter cable or a CANbus Y cable. 
The Thor VM3 does not support connecting audio and CANbus simultaneously.

See 

CANbus / Audio Connector

 for connector pinouts.

1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the 

dock.

2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.

3. The CANbus Y cable has a 9 pin F SAE J1939 (Deutsch) and 9 pin M SAE J1939 

(Deutsch) connector. Connect the appropriate cable connector as needed.

Install External Antenna

The external antenna cannot be used by devices with an internal antenna.

1. Remove the rubber cap, if present, from the antenna connector before connecting 

an external antenna.

2. Place the antenna over the antenna connector. If only one antenna is used, be sure 

to connect it to the Wi-Fi Main connector.

3. Push down and twist the antenna base clockwise until secure.

4. Repeat for second antenna, if used.

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов