manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 133 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 133

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

121

GPS Remote Mount Antenna

The external GPS antenna is an adhesive mount antenna.

1. Locate a mounting position on highest point on the vehicle, following these precau-

tions:

•

The antenna must be mounted so the antenna is not damaged while the vehicle 
or any of its parts are moving.

2. Clean the area where the antenna is to be mounted.

3. Remove the protective backing paper from the adhesive on the antenna and 

position the antenna on the vehicle.

4. Attach the connector on the coaxial cable to the GPS antenna connector on the 

vehicle mounted Thor VM3.

5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the 

cable is routed so it is not damaged by any moving parts of the vehicle.

The Remote Antenna Installation Kit 
consists of the antenna and an inte-
grated cable. The remote antenna is 
mounted on the top of a forklift, truck or 
other vehicle and cabled to the Thor 
VM3 inside the vehicle.

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов