manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 145 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 145

CHAPTER

5

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

133

SOFTWARE

Introduction

There are several different aspects to the setup, configuration and operation of the Thor 
VM3. Many of the setup and configuration settings are dependent upon the optional 
features such as hardware and software installed on the unit. The examples found in 
this section are to be used as examples only, the configuration of your specific Thor 
VM3 computer may vary. The following sections provide a general reference for the con-
figuration of the Thor VM3 and some of its optional features.

Operating System

Your Thor VM3 operating system is Microsoft

®

 Windows

®

 Embedded Compact 7. The 

Thor VM3 operating system revision is displayed on the Desktop. This is the default set-
ting for the Desktop Display Background.

Windows Embedded Compact Operating System

This segment assumes the system administrator is familiar with Microsoft Windows 
options and capabilities loaded on most standard Windows computers.

Therefore, the sections that follow describe only those Windows capabilities that are 
unique to the Thor VM3 and its Windows environment.

General Windows Embedded Compact Keyboard Shortcuts

Use the keyboard shortcuts in the chart below to navigate with the Thor VM3 keyboard. 
These are standard keyboard shortcuts for Windows Embedded Compact applications.

Press these keys … 

To … 

CTRL + C 

Copy 

CTRL + X 

Cut 

CTRL + V 

Paste 

CTRL + Z 

Undo 

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов