Honeywell Thor VM3 Скачать руководство пользователя страница 131

Страница: 131 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

119

Typical Installation

Mounting Instructions

1. Attach and secure the desired mounting bracket to the highest point on the safety

cage, following these precautions:

•

The plate must be mounted so the antenna is not damaged while the vehicle or
any of its parts are moving.

•

The antenna mounting portion of the bracket must be parallel to the floor.

•

If using two antennas, they must be mounted at least 12 inches (304.8mm) apart.

2. Attach the female connector of the coaxial cable to the antenna connector on the

vehicle mounted Thor VM3.

3. Secure the whip antenna to the mounting bracket.

4. Connect the antenna cable to the whip antenna.

5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the

cable is routed so it is not damaged by any moving parts of the vehicle.

6. Connect the cable to the antenna connector (Wi-Fi Main or Wi-Fi Aux) on the Thor

VM3. If only one antenna is used, be sure to connect it to the Wi-Fi Main connector.

7. Repeat the steps above for the second 802.11 antenna.

Antenna

Mounting Bracket

Vehicle Safety Cage

Cable

Vehicle Mounted
Computer

Содержание Thor VM3



























































































































































































































































































































































































Результаты поиска

Содержание Thor VM3

Отзывы:

Honeywell Thor VM3, Руководство пользователя, Страница: 131 / 378

Результаты поиска

Содержание Thor VM3

Отзывы: