Honeywell Thor VM3 Скачать руководство пользователя страница 46

Страница: 46 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

External Connectors

Power the Thor VM3 off before attaching a cable to any port (serial, USB, Audio/CAN,
etc.).

The external I/O connectors for the Thor VM3 are located on the right side of the dock
(when viewed from the back).

The

Power Supply Connector

is on the left side of the dock (when viewed from the back).

Antenna connectors are located on the top rear of the Thor VM3.

Serial Connector (COM1 and COM2)

Screen Blanking

The screen blanking signal can be provided either by a Honeywell Screen Blanking Box
or a user supplied switch or relay. See

Screen Blanking

for information on connecting

screen blanking accessories.

Standard Dock

Enhanced Dock

The COM1 and COM2 connectors
are D-9 male connectors located on
the back of the dock.

Power the Thor VM3 off before
attaching a cable to any port (serial,
USB, Audio/CAN, etc.).

The serial connectors are industry-
standard RS-232, PC/AT standard
9–pin “D” male connector. See

COM1 and COM2 Connector

for

connector pinout detail.

See

Connect Serial Device

for more

information.

If a COM port is not being used for a
scanner, it can be used for

Screen

Blanking

when the vehicle is in

motion.

COM1

COM2

USB

CANBUS/AUDIO

Содержание Thor VM3



























































































































































































































































































































































































Результаты поиска

Содержание Thor VM3

Отзывы:

Honeywell Thor VM3, Руководство пользователя, Страница: 46 / 378

Результаты поиска

Содержание Thor VM3

Отзывы: