Honeywell Thor VM3 Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 127

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

115

Connect Serial Device

Note:

Pin 9 of the desired COM port must be configured to p5V or RI as needed for the
connected device. See the

control panel for details.

Note:

By default, COM1 and COM2 ports are used by Enterprise Data Collection. To use a COM
port for screen blanking, access

Enterprise Settings

and set

Data Collection > Tethered

Scanners > Tethered Scanner (COMx) - Enable Scanner Port

to off (where COMx is

either COM1 or COM2).

COM1 and COM2 Connector

for connector pinouts.

1. Seat the cable end connector firmly over the serial COM port on the dock.

2. Turn the thumbscrews in a clockwise direction. Do not over tighten.

3. Secure the cables to the Thor VM3 with

Strain Relief Cable Clamps

4. Connect the other cable end to the desired serial device.

Connect a Tethered Scanner

1. The scanner cable is attached to either the COM1 or COM2 port on the dock.

2. Connect the serial cable for the scanner as directed above.

3. When the Thor VM3 is powered on, it provides power to the serial scanner.

4. Configure the Data Collection (DC) Wedge to manipulate scanned data as desired.

Connect Headset Cable

The CANbus/Audio connector supports a headset adapter cable or a CANbus cable. The
Thor VM3 does not support connecting audio and CANbus simultaneously.

CANbus / Audio Connector

for connector pinouts.

Headphones

Microphone

To Audio cable

To Audio
connector
on dock

To headset

«
...
125
126
127
128
129
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов