Honeywell Thor VM3 Скачать руководство пользователя страница 198 | Manualshive

Страница: 198 / 378

Honeywell Thor VM3 Скачать руководство пользователя страница 198

186

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Options

Start > Settings > Control Panel > Options

It may be necessary to warmboot the Thor VM3 after making desired changes. A pop up
window indicates if a warmboot is required.

Communication

Options on this tab configure communication options for the Thor VM3.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable
Remote Desktop Autologon.

Note:

The .RDP file must be saved in the \System folder. When prompted, use the Save As button
to save the .RDP file is the \System directory. If the .RDP file is saved in the default root
folder location, the .RDP file will not persist across a warmboot.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the Thor VM3. To enable TimeSync
to run automatically on the Thor VM3, check this checkbox.

Synchronize with a Local Time Server

By default, GrabTime synchronizes via an Internet connection. To synchronize with a
local time server:

1. Use ActiveSync (or a USB thumb drive) to copy GrabTime.ini from the My Device >

Windows folder on the mobile device to the host PC.

2. Edit the copy of GrabTime.ini on the host PC. Add the local time server’s domain

name to the beginning of the list of servers. You can optionally delete the remainder
of the list.

3. Copy the modified GrabTime.ini file to the My Device > System folder on the mobile

device.

The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file.
System/Grabtime.ini also persists after a coldboot; Windows/Grabtime.ini does not
persist.

«
...
196
197
198
199
200
...
»

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов