manualshive.com logo in svg

Honeywell 4022, Системное руководство

Поделиться
Скачать
Honeywell 4022 Скачать руководство пользователя страница 74

Precision Platform 4022 Scanner 

System Testing and Verification 

and document the test. The main contact numbers for Radiological 
Operations are 

First level of support: 

•

 

The Americas, Asia Pacific and India are supported directly by 
Phoenix at 602-313-3330. 

•

 

Europe, Middle East and Africa are supported by Waterford at 
+ 353 (0) 51 372 151. 

Second level of support (world-wide) is Phoenix at 602-313-3330. Phoenix 
also has a toll-free number for the U.S. and Canada at 866-811-0312. 

Information on licensing and regulatory requirements, radioactive sources 
and safety is available in the Honeywell Radiation Safety Training Manual 
(p/n 6510020199). 

 

 

   

 

WARNING

:

  

Failure to follow radiation safety procedures MAY cause exposure 
to hazardous levels of radiation. 

 

4.2.  Testing the Precision Platform operation 

Once the Precision Platform has been installed and set up, test the 
subsystems listed (in the order shown), and make any needed adjustments 
as described in the sections: 

•

 

Drive motor torque 

•

 

Main drive belt tension 

•

 

Head alignment 

•

 

Internal head temperatures 

•

 

Sheet guide temperatures 

Testing of the Precision Platform includes verifying the scanner scans and 
scans smoothly without the drive motor torque being set too high – the 
scanner heads should be able to be stopped by hand. Testing also includes 

 10/4/07 

P/N 

6510020208 

4-2 

Содержание 4022
















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды