Honeywell 4022, Системное руководство

Страница: 21 / 239

Introduction Understanding the drawing package and part numbering system
p/n 6510020208 10/4/07
ix
AA05xxxxxxC – indicates a circuit diagram of a PCB.
AA05xxxxxxS – indicates a schematic diagram of a PCB.
ASxxxxxx – indicates a test or calibration procedure typically utilized in
manufacturing to set up a sensor. This information may also contain field-
usable calibration specifications.
MN42xxxxxx or 651003xxxx indicates internal engineering documentation
such as model specifications or procedures, user specifications, notes,
calibration procedures, test and alignment procedures, and other
miscellaneous information.
GNxxxxxx indicates general procedures and product part information not
otherwise included in other areas.
The Table of Contents for the drawing package is organized into two
sections. The first section lists the model numbers in numeric order. The
second section lists the documents and drawings in alphanumeric order
(that is, the documents and drawings are listed by increasing part number
and are organized by 05, 08, 09 and 65 drawings).
MNs, ASs, and other relevant documents are also provided. However,
depending on the number and length of these documents, they may be
provided in a package separate from the drawing package.
There is also a Manual List (ML) that contains the part numbers of the
manuals written about the product. For example, ML09402231 is the list of
manuals provided to support the Da Vinci Precision Platform 4022
Scanner, model # 09402231.
A set of specific documents and drawings is sent with each system when it
is shipped from the factory. Extra sets can be ordered from Honeywell.