Hitachi S10VE Скачать руководство пользователя страница 285

Страница: 285 / 506

8. Tools

8-156

Table 8-35 Display PCs STATUS and Change PCs STATUS

No.

Error message

Action to take

Failed to get PCs status.

Check the communication paths.

Failed to change the specified PCs status.

Check the communication paths.
Check the state of the PCs.

Cannot change the ALARM LED status.

Cannot change the ERROR LED status.

Cannot change the STBY LED status.

Cannot change the RUN LED status.

The LADDER switch of the CPU module is set to
OFF.

Set the LADDER RUN/STOP switch of the CPU module to
RUN.

The CPU is in the PROTECT state.

Click the

Get Status

button to acquire the latest status

information.

The CPU is in the PROTECT OFF state.

The ladder is in the simulation state.

11 The ladder is in the normal state.

Table 8-36 Data Send/Receive window

No.

Error message

Action to take

Failed to load the module list.

Check the communication paths.

Select a module.

PCs number in the data does not match the
destination PCs number.

Check the specified file.

Module identification code in the data does not
match the module identification code of the
destination.

Check the specified file.

Invalid file size

Check the specified file.

Cannot write management information.

Check the specified file.

Failed to send data.

Check the communication paths.

Failed to write NAND.

Check the communication paths.

Failed to receive data.

Check the communication paths.

An error occurred in data comparison.

Check the communication paths.

Data inconsistency. The result was output to the file.
File name:

file-name

Check the file that was output.

Содержание S10VE



























































































































































































































































































































































































































































































































Результаты поиска

Содержание S10VE

Отзывы:

Похожие инструкции для S10VE

Бренды по названию

Популярные бренды

Hitachi S10VE, Руководство пользователя

Результаты поиска

Содержание S10VE

Отзывы:

Похожие инструкции для S10VE

Бренды по названию

Популярные бренды