Hitachi S10VE, Руководство пользователя

Страница: 13 / 506

S-10
2.3 CAUTION
CAUTION
●
Do not insert a finger or foreign object into the gap between a connector and the mount base. Doing so
might lead to injury or cause the system to malfunction.
●
To avoid fire, use an external power supply with an overvoltage and overcurrent protection function.
●
To avoid fire, if you see smoke or smell an unusual odor, turn off the power immediately and
investigate the source.
●
Do not obstruct the ventilation slots at the top and bottom of the modules. Doing so might cause smoke
or fire, or lead to module failure or malfunction.
●
The modules have open ventilation slots at the top and bottom. To avoid smoke, fire, and module failure
or malfunction, take the necessary measures to prevent objects from falling into the slots.
(See page 1-5.)
●
Do not insert a finger or foreign object into the gap between a connector and the mount base. Doing so
might lead to injury or cause the system to malfunction.
●
Do not attach the mount base to the cabinet with modules already attached to the mount base. Doing so
might cause injury or module damage as a result of a module being dropped.
(See page 6-6.)
●
Make sure that the screws are securely tightened. Failing to do so can cause smoke, fire, or malfunction,
or cause the module to fall.
(See pages 6-8 and 12-3.)
●
Do not allow ultrasonic wave vibration near the primary battery. Ultrasonic wave vibration can
pulverize its contents, causing an internal short. This can lead to issues as deformation, leakage, heat
generation, explosion, or fire.
●
Do not handle the primary battery roughly. Do not drop the battery, subject it to shock, or cause it to
deform. This can cause deformation, leakage, heat generation, explosion, or fire.
●
Take care to avoid shorting the primary battery when inserting it into the device. Some devices might
have metal parts near where the battery is inserted, which can come into contact with the plus and minus
terminal of the battery.
●
Do not use or leave the primary battery in direct sunlight, in a hot car, or any other location that
experiences high temperatures. This can cause deformation, leakage, heat generation, explosion, or fire.
●
Do not allow the primary battery to get wet. This can cause deformation, leakage, heat generation,
explosion, or fire. It can also cause the battery to rust.
●
Do not store the primary battery anywhere hot or humid. Doing so can reduce the performance or
service life of the battery. In some circumstances, it can also cause deformation, leakage, heat
generation, or explosion.
(See page 14-7.)