Hitachi S10VE Скачать руководство пользователя страница 286

Страница: 286 / 506

8. Tools

8-157

Table 8-37 Backup, Restore, and Backup save data comparison (1/2)

No.

Error message

Action to take

Failed in the CPU STOP processing.
Module: xr_rrw_stop
Error:

error-code

Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.

Failed to read data.
Check the communication path (including cable
connection).
Module:

module-name

Error:

error-code

Check the communication paths. Also, check the error code
in Table 8-48. If the error code is unknown, contact the
system administrator.

Failed to transfer data.
Check the communication path (including cable
connection).
Module:

module-name

Error:

error-code

Check the error code in Table 8-48. If the error code is
unknown, contact the system administrator.

Disc is full.

Replace the disk.

Specify a position.

Specify a path in the

Position

field.

The specified drive type is invalid.

Review the path specified in the

Position

field.

Specify a name.

Specify a name in the

Name

field.

The following character cannot be used.
/:*?"<>|

Review the path specified in the

Position

field.

Continuous '¥' of two or more characters cannot be
used.

Review the path specified in the

Position

field.

For the following files exist, the compare can not be
performed.
Evacuation the file, please execute the compare
again.
File : file-name

Take remedial action as described in the message, and
perform the backup save data comparison operation again.

For the following files exist, the restore can not be
performed.
Evacuation the file, please execute the restore again.
File : file-name

Take remedial action as described in the message, and
perform the restore operation again.

For the following files exist, the backup can not be
performed.
Evacuation the file, please execute the backup again.
File : file-name

Take remedial action as described in the message, and
perform the backup operation again.

Failed to open the UDP communication socket.

Contact the system administrator.

Failed to close the UDP communication socket.

Contact the system administrator.

The CPMS has not been downloaded.

Download CPMS and then perform the backup operation
again.

Содержание S10VE



























































































































































































































































































































































































































































































































Результаты поиска

Содержание S10VE

Отзывы:

Похожие инструкции для S10VE

Бренды по названию

Популярные бренды

Hitachi S10VE, Руководство пользователя

Результаты поиска

Содержание S10VE

Отзывы:

Похожие инструкции для S10VE

Бренды по названию

Популярные бренды