Hitachi S10VE, Руководство пользователя

Страница: 10 / 506

S-7
WARNING
●
Do not put the primary battery cables between the primary battery cover and the CPU module. Doing so
might result in shorting due to disconnection, causing deformation, leakage, heat generation, explosion,
or fire.
(See pages 6-9 and 14-8.)
●
To avoid electric shock, accident, or malfunction, make sure that the power switch of the power supply
module is off before connecting or disconnecting any cables. Re-attach the terminal cover as soon as
you have completed the wiring.
(See page 7-11.)
●
To avoid fire, place fuses on both sides of the AC power supply. This protects the system if the PCsOK
or COM line shorts to FG.
(See page 7-12.)
●
To avoid fire, place fuses on both sides of the AC power supply. This protects the system if the RI/O
STOP (or STOP/RUN) or COM line shorts to FG.
(See page 7-13.)
●
To avoid electric shock, do not touch the terminal block terminals or connector pins while the power is
on.
●
To avoid electric shock and fire, wiring must be carried out by a person with practical experience who
has undergone the appropriate training and is able to recognize the hazards presented by the work.
●
To avoid electric shock, accident, or malfunction, make sure that the power switch of the power supply
module is off before connecting or disconnecting any cables. Re-attach the terminal cover as soon as
you have completed the wiring.
●
To avoid electric shock and fire, check the wiring carefully before turning on the power.
(See page 7-19.)
●
To avoid electric shock, turn off the switch at the AC/DC power source (the MCCB or FFB, for
example) before removing or installing a power supply module.
●
To avoid electric shock, do not touch the pins on the power supply input terminal block.
(See page 14-1.)