Hioki ST5680, Инструкция по эксплуатации, Страница: 60 / 253

60
Starting and Ending a Test
The test ends and [VOLTAGE ERROR] is displayed in the following cases.
• When the output voltage does not reach
±
5% of the set test voltage
• When the voltage deviates from the set test voltage (
±
10 dgt) during the test and does not fall
within
±
10 dgt of the set voltage within 5 seconds
When the test is to be forcefully terminated
Press the
STOP
button to stop the voltage output. In this case, a pass/fail judgment is not made.
Operations during a test
The following is an example of the operation after a test starts.
DCW test (pass judgment)
No judgment in
the upper/lower-
limit value setting
Upper-limit value
judgment start
Lower-limit value judgment start
Test time
Rise time
Delay time
0.1 s
Test voltage
Start voltage
Pass judgment
Fall time
DCW test (fail judgment)
Discharge time
No judgment in
the upper/lower-
limit value setting
Upper-limit value
judgment start
Lower-limit value judgment start
Test time
Rise time
Delay time
0.1 s
Test voltage
Start voltage
Fail judgment
IR test (pass judgment)
Discharge
time
Judgment start
Test time
Rise time
Delay time
0.1 s
Test voltage
Pass judgment
HIOKI ST5680A961-00