Hioki ST5680 Скачать руководство пользователя страница 109

Страница: 109 / 253

109

Data Memory Function

8.4 Data Memory Function

Test results (up to 32,000 results) can be saved to the internal memory of the instrument. The

measurement results saved inside the instrument can be acquired either by saving them to a USB

flash drive or by using a communications command.

Information to be saved

Test mode

DCW, IR, W-IR, IR-W, program

Test start date and time

yy-mm-dd hh:mm:ss

Measured value

Voltage, current, resistance

Measurement range

Withstand voltage test mode, insulation resistance test mode

Remaining test time

(Elapsed test time for CONT)

Seconds

Judgment results

PASS, UPPER FAIL, LOWER FAIL, UPPER LOWER FAIL, other

Timer type

Test time, voltage rise time

• There is no memory backup function available. Memory data is cleared when the instrument is

turned off.

•

Save the measurement results saved inside the instrument to a USB flash drive or acquire them

using the

:MEMory:FETCh?

command.

•

Internal memory is automatically deleted if memory data is saved to a USB flash drive or is

acquired using a communications command.

•

When the number of the measurement results saved in the instrument reaches 32,000,

[MEM:FULL]

is displayed and no more measured values are saved. If restarting data saving,

either load the memory from the instrument internal memory or clear the memory data.

•

For information using a USB flash drive, see “10.1 Using USB Flash Drive” (p. 124).

Setting the memory function

Sets whether to enable or disable the memory functions. If enabled, the test results are
automatically saved to the internal memory in the instrument when the test finishes.

Press

[SYSTEM]

[STATE]

on the setting

screen.

The memory function is activated.

OFF

Disables the memory function.

*1. Default setting

Various Functions

HIOKI ST5680A961-00

Содержание ST5680






























































































































































































































































Результаты поиска

Содержание ST5680

Отзывы:

Hioki ST5680, Инструкция по эксплуатации, Страница: 109 / 253

Результаты поиска

Содержание ST5680

Отзывы: