Hioki ST5680 Скачать руководство пользователя страница 183

Страница: 183 / 253

183

Communications (USB, LAN,

RS-232C, GP-IB)

WARNING

Turn off all devices before connecting or disconnecting interface

connectors.

Failure to do so could cause the operator to experience an electric shock.

Use the screws supplied with the instrument when shipped from the

factory to secure the interface.

If other screws are used to secure the interface, the instrument could be damaged,

causing a risk of bodily injury. If you lose or damage the screws, contact your

authorized Hioki distributor or reseller.
Failure to do so could cause the operator to experience an electric shock.

CAUTION

Do not unplug the communication cable while the instrument is sending or

receiving data.

Doing so could damage the instrument and the PC.

Do not short-circuit or input any voltage to the output unit.

The instrument could be damaged.

Seat connectors securely.

Failure to do so could damage the instrument or prevent the instrument from meeting

the specifications.

Use the same ground for the instrument and the PC.

Connecting a communication cable while there is a potential difference between the

instrument and PC’s ground levels could damage the instrument and PC or cause

them to malfunction.

Turn off the instrument and PC before connecting or disconnecting

communication cables.

Failure to do so could damage the instrument and the PC being connected or cause

them to malfunction.

Once the communication cable is connected, tighten the screws on the

connector.

Otherwise, data could not be transferred properly.

Turn off the instrument and PC before connecting or disconnecting

communication cables or USB cables.

Failure to do so could damage the instrument or cause them to malfunction.

Communications (USB, LAN, RS-232C, GP-IB)

Communications

(USB,

LAN,

RS-232C,

GP-IB)

HIOKI ST5680A961-00

Содержание ST5680






























































































































































































































































Результаты поиска

Содержание ST5680

Отзывы:

Hioki ST5680, Инструкция по эксплуатации, Страница: 183 / 253

Результаты поиска

Содержание ST5680

Отзывы: