HIKVISION DS-K1T605 Series, Руководство пользователя

Страница: 12 / 107

• When the product is installed on wall or ceiling, the device
shall be firmly fixed.
• If smoke, odors or noise rise from the device, turn off the
power at once and unplug the power cable, and then please
contact the service center.
• If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions:
• Do not drop the device or subject it to physical shock, and do
not expose it to high electromagnetism radiation. Avoid the
equipment installation on vibrations surface or places subject
to shock (ignorance can cause equipment damage).
• Do not place the device in extremely hot (refer to the
specification of the device for the detailed operating
temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
• The device cover for indoor use shall be kept from rain and
moisture.
• Exposing the equipment to direct sun light, low ventilation or
heat source such as heater or radiator is forbidden (ignorance
can cause fire danger).
• Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfunction however), and affecting the endurance of sensor
at the same time.
• Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the fingers may erode the surface coating of the
device cover.
• Please use a soft and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
• Please keep all wrappers after unpack them for future use. In
case of any failure occurred, you need to return the device to
the factory with the original wrapper. Transportation without
the original wrapper may result in damage on the device and
lead to additional costs.
• Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
• Biometric recognition products are not 100% applicable to
anti-spoofing environments. If you require a higher security
level, use multiple authentication modes.
3 Overview
3.1 Overview
Face recognition terminal is a kind of access control device for
face recognition, which is mainly applied in security access
3