HIKVISION DS-K1T605 Series, Руководство пользователя

Страница: 32 / 107

Figure 8-6 Manual Mode
3. Enable the Attendance Status function.
Result
When you authenticate on the initial page, you will enter the
Select Status page. Select a status to take attendance.
Note
If you do not select a status, the authentication will be failed and
it will not be marked as a valid attendance.
8.5.2 Set Auto Attendance
Set the attendance mode as auto, and you can set the attendance
status and its available schedule. The system will auto change the
attendance status according to the configured parameters.
Before You Start
Add at least one user, and set the user's authentication mode. For
details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Auto.
Figure 8-7 Auto Mode
3. Select an attendance status and set its schedule.
Note
The attendance status will be valid within the configured
schedule. For example, if set the break out's schedule as
Monday 11:00, and break in's schedule as Monday 12:00, the
valid user's authentication from Monday 11:00 to 12:00 will be
marked as break.
23