HIKVISION DS-K1T605 Series, Руководство пользователя

Страница: 68 / 107

5. Enter the maximum interval when entering password.
6. Add an authentication group for the selected access control
point.
1) Click Add on the Authentication Groups panel.
2) Select a configured template as the authentication template
from the drop-down list.
Note
For setting the template, refer to Configure Schedule and
Template.
3) Select the authentication type as Local Authentication,
Local Authentication and Remotely Open Door, or Local
Authentication and Super Password from the drop-down
list.
Local Authentication
Authentication by the access control device.
Local Authentication and Remotely Open Door
Authentication by the access control device and by the
client. When the person swipes the card on the device, a
window will pop up. You can unlock the door via the
client.
Figure 9-1 Remotely Open Door
Note
You can check Offline Authentication to enable the super
password authentication when the access control device
is disconnected with the client.
Local Authentication and Super Password
Authentication by the access control device and by the
super password.
4) Select the added person/card group in the left list below and
it will be added to the Selected list on the right as the
authentication group.
5) Click the added authentication group in the right list to set
authentication times in the Auth Times column.
Note
• The authentication times should be larger than 0 and
smaller than the added personnel quantity in the
personnel group.
• The maximum value of authentication times is 16.
6) Click Save.
59