HIKVISION DS-K1T605 Series, Руководство пользователя

Страница: 35 / 107

8.7.1 Set Basic Parameters
You can set the device ID, time format, keyboard sound, voice
prompt, voice volume, application mode, power button, auto
enable supplement light, brightness, language, and threshold for
auto enabling Supplement Light.
On the Home page, tap System (System Settings) to enter the
System Settings page.
Figure 8-9 Basic Parameters
Parameter Description
Device ID
Set the face recognition terminal's device ID No.
The device ID is the DIP address for the
communication between the device and the access
controller if the device should connect to an access
controller via RS-485 protocol.
Time Format
You can select one of the following formats: MM/DD/
YYYY, MM.DD.YYYY, DD-MM-YYYY, DD/MM/YYYY,
DD.MM.YYYY, YYYYMMDD, YY-MM-DD, YY/MM/DD,
and MM-DD-YYYY.
Keyboard Sound Tap
or to disable or enable the keyboard
sound.
Voice Prompt
Tap or to disable or enable the voice prompt.
Voice Volume
Adjust the voice volume. The larger the value, the
louder the volume.
Application
Mode
You can select either others or indoor according to
actual environment.
Power Button
Namely, it is the doorbell button. Tap or to
disable or enable the function.
If enabling the function, hold the doorbell button for
3s to power off.
If disabling the function, the doorbell button will not
contain the powering off function.
Note
• Some device models do not support the function.
• If you power off the device via this button, you
should hold the button to power on for the next
time.
26