46
360093-1/H
Platelet Incubator Operation Manual
To view real-time agitator cycle counts
1
Access the AGITATOR INFORMATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
From the MAIN screen, use the buttons to navigate to and select the i.Help option. The
AGITATOR INFORMATION screen appears with the first option highlighted.
2
Do one of the following to display the AGITATOR TOTAL CYCLE COUNT screen, on which the
current cycle count for each agitator appears in units of thousands:
►
Press the Down button until Agitator RPM is highlighted, then press the Select button. The
AGITATOR RPM screen appears with the current speed for each agitator. Press the Cycles button.
►
Press the Down button until Agitator Cycles is highlighted, then press the Select button.
3
Press the BACK button to return to the previous screen, or press the HOME button to return to the
HOME screen.
6.9.2
Viewing the chart paper status
You can view the number of days remaining before the chart paper needs to be changed.
To view the chart paper status
►
From the MAIN screen, use the buttons to navigate to and select the System Alarm Test & Status
option. The SYSTEM ALARM TEST & STATUS screen appears, showing the number of days
remaining (if the chart paper timer is enabled) or the status of the time (if disabled).
6.9.3
Viewing the door status
You can view whether the i.Center monitoring system detects that a door is open.
To view the door status
►
From the MAIN screen, use the buttons to navigate to and select the System Alarm Test & Status
option. The SYSTEM ALARM TEST & STATUS screen appears, showing the door status (OPEN or
CLOSED).
6.9.4
Viewing the condenser temperature
You can view the temperature of the condenser discharge line. This may be useful for troubleshooting.
To view the condenser temperature
►
From the MAIN screen, use the buttons to navigate to and select the System Alarm Test & Status
option. The SYSTEM ALARM TEST & STATUS screen appears, showing the condenser temperature.
6.10
Viewing historical information
NOTE:
This section only applies to i.Series models.
The i.Center monitoring system has an event log that displays information about the previous fifty alarm
events. It also displays the number of door openings for the current and previous day.
It also has an event log that displays information about when the agitator cycle counters were reset.
