24
360093-1/H
Platelet Incubator Operation Manual
4.3
Changing unit and format settings
You can change the display language, the date format, and the time format.
4.3.1
Changing the display language
NOTE:
A password is needed to complete this task. For more information about the
password, see Section 4.6, “Changing the password.”
You can change the language that is used to display text to any stored language.
The monitoring system can store two languages, which are loaded from the flash memory card. By default,
only English is loaded and selected. If you want to use a language other than English, it must first be loaded
from the flash memory card to be stored on the monitoring system. If a flash memory card is not included
with your incubator, your distributor may have loaded the appropriate languages prior to shipment. For
more information about available languages and instructions for loading them, refer to the documentation
provided with the flash memory card or contact Helmer or your local distributor.
To change the display language
1
Access the CONFIGURATION screen.
a
From the HOME screen, press the MAIN button. The MAIN screen appears.
b
Use the buttons to navigate to and select the Edit Configuration option. You are prompted to enter
your password.
c
Enter your password. If the password is correct, the CONFIGURATION screen appears with the
first option highlighted.
2
From the CONFIGURATION screen, use the buttons to navigate to and select the System Options
option. The SYSTEM OPTIONS screen appears with the Language setting highlighted.
3
Press the INC or DEC button until the language that you want to use appears.
4
Press the BACK button to return to the previous screen, or press the HOME button to return to the
HOME screen. The setting is saved. Display text for all screens changes to the language you selected.
4.3.2
Changing date and time information
NOTE:
A password is needed to complete this task. For more information about the
password, see Section 4.6, “Changing the password.”
You can change the current date and time settings and the format used to display them. The date and time
are displayed on the HOME screen and in the Event Log.
The Date Format setting controls the order in which the month (mm) and day (dd) are displayed. The year (yyyy)
is always displayed last. The month setting is a two-digit number (01-12) representing the month. The day setting
is a two-digit number (01-31) representing the day. The default format set by the factory is mm/dd/yyyy.
The Clock Mode setting controls whether the time is displayed in a 12-hour or 24-hour format. For both
settings, you can change the hour and minute values. If you are using the 12-hour format, you must also
specify whether the time is AM or PM. The default format set by the factory is 12-hour.
