Harris eCDi, Техническое руководство

Страница: 87 / 190

1/3/05 888-2517-001 3-23
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
eCDi ™
any of the other 5 buttons shown here. Simply select one of these 5 buttons and then
select the Full Screen button that shows up in the window
.
At the bottom of any of the 5 full screen views will be the BenchMark controls, Show
and Save , see Figure 3-23. In this example 3 BenchMarks have been saved with 2 still
empty. The Show Benchmark screen is active and None is selected. Pressing the Slot 1,
Slot 2, or Slot 3 button will select that Benchmark and the appropriate saved waveform
will be displayed over the active waveform in the graph located above these controls.
The saved Benchmark waveform will be displayed in a different color (light blue) than
the active waveform.
NOTE:
Once a Benchmark is turned on, it will show up on every performance
monitoring graph until it is turned off by pressing None.
Figure 3-23 BenchMark Controls
Pressing SAVE will bring up the Save Benchmark controls as shown in Figure 3-24. To
save a Benchmark, press one of the 5 buttons labeled Slot 1 - Slot 5. A snapshot is taken
of all of the performance metrics and stored with a Time and Date stamp on the button.
NOTE:
Pressing a button with a previously saved Benchmark will automatically over-
write the existing data. It will
not ask for confirmation before over-writing.
Use the PURGE ALL button to remove all benchmarks. This function will not ask for
confirmation before deleting.
?