Harris eCDi, Техническое руководство

Страница: 179 / 190

1/3/05 888-2517-001 F-7
WARNING: Disconnect primary power prior to servicing.
Appendix F Platinum Z Fault and Meter Log Reference
eCDi ™
Table F-5 Platinum Z RF Drive Faults
Group Fault Log Name Fault Description
drv DRVSUMFAULT Status of the front panel F1 Drive Chain LED Active low
drv DRVSUMWARNING Drv sum warning
drv EX1FAULT “Exciter1 fault.Enum: 0=Ok,1=Fault”
drv EX1LOWFAULT “Exciter1 low fault.Enum: 0=Ok,1=Fault”
drv EX2FAULT “Exciter2 fault.Enum: 0=Ok,1=Fault”
drv EX2LOWFAULT “Exciter2 low fault.Enum: 0=Ok,1=Fault”
drv EXCITERFAULT “Exciter fault. Enum: 0=Ok,1=Fault”
drv IPAAB1LOWFAULT “IPA AB1 Low Fault.Enum: 0=Ok,1=Fault”
drv IPAAB1OUTFAULT “IPA AB1 out fault.Enum: 0=Ok,1=Fault”
drv IPAAB1OVERCURRFAULT “IPA AB1 Over Current Fault.Enum: 0=Ok,1=Fault”
drv IPAAB1OVERTEMPFAULT “IPA AB1 Over Temp Fault.Enum: 0=Ok,1=Fault”
drv IPAAB2LOWFAULT “IPA AB2 Low Fault.Enum: 0=Ok,1=Fault”
drv IPAAB2OUTFAULT “IPA AB2 out fault.Enum: 0=Ok,1=Fault”
drv IPAAB2OVERCURRFAULT “IPA AB2 Over Current Fault.Enum: 0=Ok,1=Fault”
drv IPAAB2OVERTEMPFAULT “IPA AB2 Over Temp Fault.Enum: 0=Ok,1=Fault”
drv IPAABSUMFAULT Ipa AB 1 Ipa Sum Fault
drv IPAABTEMPWARNING “IPA AB temp warning.Enum: 0=Ok,1=Warning”
drv IPACD1LOWFAULT “IPA CD1 Low Fault.Enum: 0=Ok,1=Fault”
drv IPACD1OUTFAULT “IPA CD1 out fault.Enum: 0=Ok,1=Fault”
drv IPACD1OVERCURRFAULT “IPA CD1 Over Current Fault.Enum: 0=Ok,1=Fault”
drv IPACD1OVERTEMPFAULT “IPA CD1 Over Temp Fault.Enum: 0=Ok,1=Fault”
drv IPACD2LOWFAULT “IPA CD2 Low Fault.Enum: 0=Ok,1=Fault”
drv IPACD2OUTFAULT “IPA CD2 out fault.Enum: 0=Ok,1=Fault”
drv IPACD2OVERCURRFAULT “IPA CD2 Over Current Fault.Enum: 0=Ok,1=Fault”
drv IPACD2OVERTEMPFAULT “IPA CD2 Over Temp Fault.Enum: 0=Ok,1=Fault”
drv IPACDSUMFAULT Ipa CD 1 Ipa Sum Fault
drv IPACDTWFAULT “IPA CD temp warning.Enum: 0=Ok,1=Fault”
drv IPAFAULT “IPA fault.Enum: 0=Ok,1=Fault”
drv IPALOADFAULT “IPA load fault.Enum: 0=Ok,1=Fault”
drv IPAMUTEFAULT “IPA mute fault.Enum: 0=Ok,1=Fault”
drv MASTERREFFAULT “Master Reference Fault.Enum: 0=Ok,1=Fault”
drv PREC1COMMFAULT Precorrector1 communication fault
drv PREC1FWDPWROVERPWR Precorrector1 fwd power over power (latched)
drv PREC1INPUTOVERPWR Precorrector1 input over power (latched)
drv PREC1LOWRFOUT Precorrector1 low RF out (latched)