Harris eCDi, Техническое руководство

Страница: 156 / 190

D-2 888-2517-001 1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Appendix D Ranger Fault and Meter
D.2 Fault Log Reference
Table D-1 Ranger Fault Log Reference
Group Fault Log Name Fault Description
System Faults
sys COMMSUMFLT Triggered if any of the subsystem comm faults are high
sys DATASOURCEOFFLINE “TX,Ex connection lost”
sys EVENTDESCRIPTION “SNMP trap description, Virtual data point”
sys EVENTDESCRIPTION2 “SNMP trap description, Virtual data point for extended
MIB”
sys EVENTINDEX used as running index for traps so that the manager knows
that he did not miss any
sys EVENTINDEX2 used as running index for traps so that the manager knows
that he did not miss any
sys EVENTPRIORITY “SNMP trap priority (fault, warning,… ), Virtual data point”
sys EVENTPRIORITY2 “SNMP trap priority (fault, warning,… ), Virtual data point
for extended MIB”
sys SYSCOOLINGFLT “Cooling summary fault including coolant and air (0=ok,
1=fault)”
sys SYSSUMFAULT System summary fault
sys SYSSUMWARNING System summary warning
sys TXSUMFAULT “TX fault summary, Virtual data point”
sys TXSUMWARNING “TX warning summary, Virtual data point”
sys EXTIOCOMS External IO is responding on CAN when active
sys PSMCOMS PS Monitor is not communicating if faulted high
sys RFMCOMS RF Monitor is responding on CAN when active
sys EXIORMTEXINLKIN External IO remote external interlock in
sys EXIORFMUTEINTLK External IO RF mute interlock
sys PA1CANFAULT PA1 module CAN communication loss
sys PA2CANFAULT PA2 module CAN communication loss
Power Supply Faults
ps PSSUMWARNING Ps sum warning
ps PSSUMFAULT Status of the front panel F4 Power Supply LED Active low
ps PSMPAPSDC Power amp. Power supply DC output OK
ps PSMLVPSDC Low voltage power supply DC output levels are OK
ps PSMLVPSAC Low voltage power supply AC input level is OK
ps PSMN15BUS -15 volt DC bus level OK