Harris eCDi, Техническое руководство

Страница: 175 / 190

1/3/05 888-2517-001 F-3
WARNING: Disconnect primary power prior to servicing.
Appendix F Platinum Z Fault and Meter Log Reference
eCDi ™
sys PSC1COMMFAULT PS controller1 fault.Enum: 0=Ok,1=Fault
sys PSC2COMMFAULT PS controller2 fault.Enum: 0=Ok,1=Fault
sys SYSEEPROMFAULT EEPROM fault.Enum: 0=Ok,1=Fault
sys SYSSUMFAULT System status enumeration
sys SYSSUMWARNING System summary warning
sys TEMPFAULT Temp fault. Enum: 0=Ok,1=Fault
sys THERMISTORFAULT Thermistor fault.Enum: 0=Ok,1=Fault
sys TXSUMFAULT TX fault summary. 0=Ok,1=ActiveFault
sys TXSUMWARNING TX warning summary
Table F-2 Platinum Z Power Supply Faults
Group Fault Log Name Fault Description
ps PHASELOSS “PS Phase loss fault.Enum: 0=Ok,1=Fault”
ps PS#CONFIGFAULT “PS# Configuration Fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#CONFIGFAULT “PS Configuration fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#DSCHGFAULT “PS discharge fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#HSTEMPFAULT “PS heatsink temperature fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#JUMPFAULT “PS jump fault. Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#PHASELOSSFAULT “PS phase loss fault. Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#STARTFAULT “PS start fault. Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#SUMFAULT PS C# Sum Fault (#=1-4)
ps PSC#TAP1FAULT “TAP1 fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#TAP2FAULT “TAP2 fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#TAP3FAULT “TAP3 fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSC#TAP4FAULT “TAP4 fault.Enum: 0=Ok,1=Fault” (#=1-4)
ps PSSUMFAULT PS Summary Fault
ps PSSUMWARNING PS Summary Warning
Table F-1 Platinum Z System Faults
Group Fault Log Name Fault Description