Harris eCDi, Техническое руководство

Страница: 178 / 190

F-6 888-2517-001 1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Appendix F Platinum Z Fault and Meter Log Reference
pa Z#7OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA7 over current fault.Enum:
0=Ok,1=Fault”
pa Z#7OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA7 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#7SUMFAULT Z-Plane-# (# = A,B,C or D) module 7 pa sum fault
pa Z#8OUTFAULT “Z-Plane-# (# = A,B,C or D) PA8 out fault.Enum: 0=Ok,1=Fault”
pa Z#8OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA8 over current fault.Enum:
0=Ok,1=Fault”
pa Z#8OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA8 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#8SUMFAULT Z-Plane-# (# = A,B,C or D) module 8 pa sum fault
pa Z#PASUMFAULT Z-Plane-# (# = A,B,C or D) pa sum fault
Table F-4 Platinum Z Output Faults
Group Fault Log Name Fault Description
out FOLDBACKFAULT “Foldback. Enum: 0=Ok,1=Fault”
out FOLDBACKFAULT1 “Foldback. Enum: 0=Ok,1=Fault (Redundant with
foldbackFault)”
out OUTISOABCDFAULT “ISO combiner ABCD fault.Enum: 0=Ok,1=Fault
(Redundant to isoABCDFault)”
out OUTISOABCDFAULT “ISO combiner ABCD fault.Enum: 0=Ok,1=Fault”
out OUTISOABFAULT “ISO combiner AB fault.Enum: 0=Ok,1=Fault”
out OUTISOAFAULT “ISO combiner A fault.Enum: 0=Ok,1=Fault”
out OUTISOBFAULT “ISO combiner B fault.Enum: 0=Ok,1=Fault”
out OUTISOCDFAULT “ISO combiner CD fault.Enum: 0=Ok,1=Fault”
out OUTISOCFAULT “ISO combiner C fault.Enum: 0=Ok,1=Fault”
out OUTISODFAULT “ISO combiner D fault.Enum: 0=Ok,1=Fault”
out OUTISOLOADFAULT “ISO load fault.Enum: 0=Ok,1=Fault”
out OUTPOWERFAULT “Out Power Fault.Enum: 0=Ok,1=Fault”
out OUTREFLPWRFAULT “Reflected Power Fault.Enum: 0=Ok,1=Fault”
out OUTSUMFAULT Status of the front panel F3 Output LED Active low
out OUTSUMWARNING Output sum warning
out OUTVSWRFAULT “VSWR fault.Enum: 0=Ok,1=Fault”
out XMTRPWRLOWFAULT “Tx Power below threshold. Enum: 0=Ok,1=Fault”
Table F-3 Platinum Z Power Amplifier Faults
Group Fault Log Name Fault Description