GRASS VALLEY LIVETOUCH, Руководство пользователя

Страница: 167 / 255

167
Live Touch
User Guide
Calibrating the Jog Wheel Shuttle End-stops
On occasion you may need to re-calibrate the end stops of the jog when used in shuttle
mode, to set the full extremities of its range with the clutch engaged.
Calibrate the shuttle end-stops for the Jog Wheel as follows:
1 With the jog wheel at rest, ensure that the display reads 0% .
If not, press: .
2 Move the jog wheel anti-clockwise, against the spring, until you reach the end-stop.
3 Back off slightly from the end position and while holding the jog wheel in position,
press: .
4 Move the jog wheel clockwise, against the spring, until you reach the end-stop.
5 Back off slightly from this end position and while holding the jog wheel in position,
press: .
6 Press to save your changes and return to the Panel Settings menu .
Check the jog wheel configuration by noting that the display changes from -50% to
+50% from one end stop to the other. If not, you must restart the configuration. In
Note: Do not force the jog wheel past the end stops. If this happens restart
the configuration from step 1.
Fig. 4-15: Calibrating the Jog Wheel Shuttle End-stops
Rotate Panel Jog
Wheel to Left and
Right End Stops
Return to Panel
Settings Screen
Set the Positive
(Right) End-stop
Reset Current
Settings
Set the Negative
(Left) End-stop