Giga-tronics Series 12000A, Руководство по эксплуатации

Страница: 136 / 238

Series 12000A Microwave Synthesizers
3-20 Publication 31231, Rev J, October 2003
LIST:RANGe:POWer
Syntax: LIST:RANGe:POWer
Example: LIST:RANGe:POWer -3 ! Set the list power range to -3 dBm
Description:
This command sets the power output for each point in the list range set to d ( NOTE:
The unit for the power level is dBm) .
LIST:RANGe:STARt
Syntax: LIST:RANGe:STARt d [HZ |KZ | KHZ | MZ | MHZ | GZ | GHZ]
Example: LIST:RANGe:STARt 100 MHZ ! Se the start frequency of the list range to 100 MHZ
Description:
This command sets the start frequency for the list range to d .
LIST:RANGe:STEP
Syntax: LIST:RANGe:STEP [HZ |KZ | KHZ | MZ | MHZ | GZ | GHZ]
Example: LIST:RANGe:STEP 100 MHZ ! Se the step frequency of the list range to 100 MHZ
Description:
This command sets the step frequency for the list range to d .
LIST:RANGe:STOP
Syntax: LIST:RANGe:STOP [HZ |KZ | KHZ | MZ | MHZ | GZ | GHZ]
Example: LIST:RANGe:STOP 100 MHZ ! Se the stop frequency of the list range to 100 MHZ
Description:
This command sets the stop frequency for the list range to d .
LIST:REPeat
Syntax: LIST:REPeat SWEEp|STEP|CONTinuous
Example: LIST:REPeat STEP ! Sets the repeat mode for the current list to STEP
Description:
This command sets the repeat mode for the current running list to one of the
followings: SWEEP, STEP or CONTINUOUS.
LIST:RUN
Syntax:
LIST:RUN n
Example:
LIST:RUN 2 ! Set list 2 as the current running list
Description:
This command sets list n as the currently editing list.
LIST:RUN?
Syntax:
LIST:RUN?
Description:
This command returns the current running list number.