getemed VitaGuard VG2100, Руководство по эксплуатации

Страница: 73 / 124

Alarm and monitor settings 73
8.5.4
System\ Signal beep tone
You can configure the monitor to emit a brief signal tone with every
detected respiration (
Respiration
) or with every detected heartbeat
(
Heart/ pulse beat
).
When this tone disturbs the patient
or caregivers, choose the setting
Off
.
The factory setting is
Off
.
Fig. 39 System\ submenu “Signal beep tone”
8.5.5
System\ Alarm tone pitch
You can set the pitch of the acoustic alarm signals to
Low
,
Medium
,
or
High
so that they can be heard over the expected background
noise. The DIN settings (DIN) match the alarm tone characteristics as
described from page 59 on in the section “Differentiating physiologi-
cal and technical alarm signals”. As
an alternative, you can set the alarm
tone characteristic (gtm) as familiar
from other getemed devices.
The factory setting is
Medium
.
Fig. 40 System\ submenu “Alarm tone pitch”
8.5.6
System\ RS232 format
This submenu lets you assign the
format for online data output from
the AUX serial port.
Fig. 41 System\ RS232 format