5-12
UAS 7626 DIU
GDC 087R706-000-02
Figure 5-12
UAS 7626 Diagnostics Screen
Table 5-2
Diagnostic
Option Settings
The Diagnostic procedure involves the following steps:
1.
From the Main Menu, select the Diagnostics function by typing
2
and pressing the Enter
key. In response the screen displays the Diagnostics submenu, listing Loops 1 – 6.
2.
Type the number of the loop on which you intend to perform tests and press the Enter key.
In response the screen displays the Diagnostics screen for the selected loop.
3.
To select a test to be performed, type the appropriate selection number and press the Enter
key. Highlighting appears on the current setting field.
Option
Potential Settings
[0] Return to Main Menu
Returns you to the UAS 7626 Main Menu.
[1] Digital Loop:
Idle
Active – commands digital loopback toward network
[2] Remote Digital Loop:
Idle
Active – commands digital loopback at the remote toward network and 7626
[3] Self Test:
Idle
Active – commands loopback toward DTE with Self Test and error check
[S] Save
Starts or stops loopback by saving current settings
UAS 7626 Diagnostics - Loop 1
[1] Digital Loop: Idle
[2] Remote Digital Loop: Idle
[3] Self Test: Idle
Self Test Results:
[0] Return to Main Menu [S] Save [CR] Return to previous Menu
Select: [ ]
