2-4
UAS 7001 NIU
GDC 087R706-000-02
Unit Configuration
The UAS 7001 Unit Configuration screen shown in Figure 2-3 presents a screen of configuration
options that determine operating parameters for the network interface of the UAS 7001 NIU.
Each option is identified by a selection number and displays its current setting.
Table 2-1, which follows the figure, lists the settings available for each option. The table is
followed by the procedure for setting options and saving the configuration settings.
Figure 2-3
Unit Configuration Screen
Table 2-1
Unit Configuration Option Settings
(Continued on next page)
Option
Potential Settings
[0] Return to Main Menu
Returns you to the UAS 7001 Main Menu.
[1] Network Interface
Type:
DSX1 – for limited range local T1 connection (Default)
DS1 – for connection to a T1 line
[2] Transmit Clock
Source:
Recovered – 7001 uses timing recovered from the network receive T1 data as the
send timing source for T1 data output to the network (Default)
Internal – 7001 serves as the timing source for T1 data output to the network
System – 7001 uses timing supplied by the shelf back plane as the timing source for
T1 data output to the network
UAS 7001 Unit Configuration Submenu
[1] Network Interface Type: DSX1
[2] Transmit Clock Source : RECOVERED
[3] Fallback Clock Source : INTERNAL
[4] PreEqualization : 0-130FT
[5] Framing : ESF
[6] Line Coding : B8ZS
[7] Line Buildout : -7.5dB
[8] FDL Mode : NONE
[9] Framing Mode : AUTO
[10] In-Band Loopback Code : INHIBIT
[11] AIS Loopdown : INHIBIT
[12] Line Buildout Control : MANUAL
[CR]Return to Previous Menu [S] Save
[0] Return to Main Menu
Select: [ ]
