4-6
UAS 7616 DIU
GDC 087R706-000-02
Table 4-1
Unit Configuration Option Settings
The Unit Configuration procedure involves the following steps:
1.
From the Configuration menu, select the Unit Configuration screen by typing 1 and press-
ing the Enter key.
2.
Type the selection number of the channel you intend to set and press the Enter key. High-
lighting appears on the current setting field for the corresponding option.
3.
Use the arrow keys to toggle the highlighted field through its potential settings.
4.
When the field displays the desired setting, press the Enter key. The highlighting disap-
pears and the field displays the new setting
5.
Repeat steps 2 through 4 for each channel you need to set. Remember that when you set a
Channel A to 128 K, the Channel B for that loop must be Disabled. If you attempt to save
a configuration with Channel A set to 128 K and Channel B set to 64 K, the DIU changes
the Channel B setting to Disabled.
6.
To put the configuration changes you’ve made into effect, type S (Save) and press the Enter
key. You may use either upper or lower case for letter responses.
In response, the screen prompts for confirmation:
*WARNING - SAVING DISRUPTS COMMUNICATIONS Continue? [ ] Y(es), N(o)
Option
Potential Settings
[0] Return to Main Menu
Returns you to the UAS 7616 Main Menu.
[1] Loop1 Channel A Data
Rate:
Disabled (Default)
64K
128K
[2] Loop1 Channel B Data
Rate:
Disabled (Default)
64K
[3] Loop2 Channel A Data
Rate:
Disabled (Default)
64K
128K
[4] Loop2 Channel B Data
Rate:
Disabled (Default)
64K
[5] Loop3 Channel A Data
Rate:
Disabled (Default)
64K
128K
[6] Loop3 Channel B Data
Rate:
Disabled (Default)
64K
[CR]Return to Previous
Menu:
Returns you to the UAS 7616 Configuration menu screen
[S] Save
Saves settings