UAS 7001 NIU
2-23
GDC 087R706-000-02
TR-54016 Interval Table
When you select TR-54016 Interval Table, the screen displays the UAS 7001 TR-54016 Interval
Table Submenu screen shown in Figure 2-15. The screen displays four hours (16 15-minute
intervals) of information on five error conditions that can occur in the unit:
Errored Seconds (ES)
Severely Errored Seconds (SES)
Bursty Errored Seconds (BES)
Unavailable Seconds (UAS)
Loss of Frame Count (LOFC)
The Interval (INTVL) column identifies the intervals; 1 is the most recently completed.
The unit stores 24 hours of interval data and you can step through the display, four hours at time,
by pressing the Space bar and then the Enter key. After the oldest data, intervals 81 – 96, the
display returns to the most recent, intervals 1 – 16.
The screen displays only intervals that have actually been completed. The accumulation of data
has to run for 24 hours following start-up or reset before there are 96 intervals to display.
When you’re done viewing the TR-54016 Interval Table Submenu, you may either return to the
Performance Menu screen by pressing the Enter key – identified as
CR
(Carriage Return) in the
screen prompt – or return to the Main Menu by typing
0
and pressing the Enter key.
Figure 2-15
UAS 7001 TR-54016 Interval Table Screen
UAS 7001 TR-54016 Interval Table Submenu
INTVL ES SES BES UAS LOFC
1 0 0 0 900 0
2 0 0 0 900 0
3 0 0 0 900 0
4 0 0 0 900 0
5 0 0 0 900 0
6 0 0 0 900 0
7 0 0 0 900 0
8 0 0 0 900 0
9 0 0 0 900 0
10 0 0 0 900 0
11 0 0 0 900 0
12 0 0 0 900 0
13 0 0 0 900 0
14 0 0 0 900 0
15 0 0 0 900 0
16 0 0 0 900 0
[SP, CR] Display next 16 intervals(1-16,17-32,33-48,49-64,65-80,81-96)
[CR] Return to Previous Menu
[0] Return to Main Menu
Select: [ ]
