manualshive.com logo in svg

gefran ADL500, Быстрый старт, технические характеристики и установка, Страница: 9 / 96

Поделиться
Скачать
gefran ADL500 Скачать руководство пользователя страница 9

 

ADL500 • Quick installation guide - Specifications and connection

 

9

2.1 Dedicated features

ADL510

ADL530

ADL550

Wi-Fi communication

Plug-in for optional Wi-Fi Drive Link module for wireless communication via GF_LifTouch APP (in preparation).

-

Yes

Yes

GF_Liftouch (WebApp)

Fully responsive Web App, compatible with all major browsers on smartphones, tablets and PCs, and with any 
operating system (in preparation).

-

Yes

(optional)

Yes

(optional)

GF_DriveLabs (Configurator)

Enhancement of Gefran PC configurator features in the same “family feeling” programming. Includes an inte-
grated real-time oscilloscope and 4 different levels of access (in preparation).

Yes

Yes

Yes

USB PORT

USB port for import/export of inverter files, motor pre-configuration files and selection of language.

-

Yes

Yes

ETHERNET PORT

RJ-45 port for configuration via PC using the Modbus TCP/IP protocol.
Can also be used to connect the inverter to a router for remote control.

Yes

Yes

Yes

GREEN SOLUTIONS AND FEATURES 

Regenerative configuration with external AFE200 modules and calculation of the energy saved.
Stand-by feature that deactivates the power section when the system is stopped.

-

-

Yes

Emergency batteries

Emergency battery management
External batteries recharged during braking phase (with system external to the ADL500 drive).

Yes

-

Yes

-

Yes
Yes

Smooth Emergency

To be implemented by adding external systems.

-

Yes

Yes

Optimised SLS control

Sensorless control optimised for asynchronous motors.

Yes

Yes

Yes

Speed control 

EFC (Elevator Floor Control) function: separate function for independent management of short floors, landing zone, 
re-starting with lift not at floor and automatic deceleration point calculation.

Yes

Yes

Yes

Position control

EPC (Elevator Positioning Control) function: separate function for independent management of direct arrival at the 
floor with internal position regulator and saving of floor distances (system autotuning). In preparation.

-

Yes

Yes

Lift sequence 

Typical sequence of input/output signals used in civil lift engineering applications such as I/O management, brak-
ing, output contactor and door control.

Yes

Yes

Yes

Parameters in linear unit   

Possibility of selecting different engineering units (also with values for the US) for the main movement param-
eters, rpm (fpm) or m/s for speed, m/s², m/s³ (ft/s

2

, ft/s

3

) for cabin acceleration.

Yes

Yes

Yes

Lift mechanical parameters  

Mechanical system parameters such as pulley diameter and speed ratio for converting system units and weights, 
system for calculating inertia and speed regulation for the desired response.

Yes

Yes

Yes

Ramp generation

Independent configuration of acceleration and deceleration ramp parameters and of the 4 jerk values for maxi-
mum travelling comfort in the lift cabin. Two independent S-shaped ramps, selectable via digital input with 4 
independent jerk settings. Dedicated deceleration ramp corresponding to the stop command.

Yes

Yes

Yes

Multiple speeds

8 internally settable speed reference values. Possibility of overwriting at start-up with additional values to ensure 
smooth starting.

Yes

Yes

Yes

Pre-torque (load compensation)

Initialisation of the speed regulator by the weight sensor to prevent jerks or bumpy starting.

Yes

Yes

Yes

Increased overload

Overload capacity in line with typical lift application load cycles.

Yes

Yes

Yes

Fan control logic 

The fan control logic activates the internal fans according to the temperature.

Yes

Yes

Yes

Emergency single-phase power supply to return to the floor

In emergency conditions a 230 V single-phase supply voltage can be used to return the cabin to the floor by UPS 
power supply or batteries with EMS (integrated on ADL5...-....-EMS models).

Yes

Yes

Yes

User-friendly menus

The menus feature lift-specific DISPLAY and motor STARTUP terminology

Yes

Yes

Yes

Saving parameters

Drive parameters can be saved on USB memory.

No

Yes

Yes

Содержание ADL500

































































































Отзывы:

Нет отзывов