GE H45011DT, Руководство по обслуживанию

Страница: 505 / 594

GE M
EDICAL
S
YSTEMS
D
IRECTION
2392751-100, R
EVISION
3 V
IVID
™ 4 S
ERVICE
M
ANUAL
8-122 Section 8-8 - Peripherals
8-8-2-4-1 Mitsubishi VCR Setup Procedure
NOTE: This procedure must be performed on initial Mitsubishi VCR installation.
NOTE: The Mitsubishi VCR can be configured using the Menus on the front panel ( Figure 8-110 ) as follows:
• Use the Jog button to navigate between the selections.
• Push the Enter button to apply your selection.
To configure the Mitsubishi VCR:
1.) Press the VCR Play B. button on the Vivid™ 3 control console to display the VCR menus on the
Vivid™ 3 monitor.
2.) Using the Jog button on the VCR front panel ( Figure 8-110 ), select the required VCR menu
language ( Figure 8-111 ), then press the Enter button to continue to the next menu.
3.) Select the <Menu1> settings, according to the configuration shown in Figure 8-112 below , then
press the Enter button to continue to the next menu.
Figure 8-110 Mitsubishi VCR Front Panel
Figure 8-111 Language Menu
Jog Button
Enter Button