GE H45011DT, Руководство по обслуживанию

Страница: 332 / 594

GE M
EDICAL
S
YSTEMS
D
IRECTION
2392751-100, R
EVISION
3 V
IVID
™ 4 S
ERVICE
M
ANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-79
11) Trackball to the <GetVolInfo> button and press Select . The message Media in drive G has
following properties: Media Label = TEST_LABEL, Media File-System Name = FAT
is displayed.
12) Trackball to the Exit button and press Select .
7-4-6-2 CD Writer Diagnostic Test
1) Insert a new recordable CD X16 in the CDR drive.
2) Access the HW Diagnostics menu, as described in the Accessing the Back End Diagnostic Options
section, on page 7-69.
3) Trackball to the Media Driver button and press Select . The Util_MO_CDR_App dialog box is
displayed, as shown in Figure 7-52 on page 7-78.
4) Trackball to the CDR radio button and press Select .
5) Trackball to the IsMediaAccess button and press Select .
The message Media in drive H is accessible is displayed.
6) Trackball to the Eject button and press Select .
The message Finalize Media? is displayed.
7) Select No . The message Media is outside is displayed.
Verify that the media has actually been ejected.
8) Trackball to the Load button and press Select . The message Media is inside is displayed.
Verify that the media is actually inside.
9) Trackball to the Format button and press Select .
The message Media in drive H was formatted successfully is displayed.
10) Trackball to the GetVolInfo button and press Select .
The message: Media in drive H has following properties: Media Label = MY_LABEL, Media
File-System Name = CDUDF is displayed.
11) Trackball to the GetBtPSector button and press Select .
The message The Bytes Per Sector value of media in drive H is 2048 is displayed.
12) Trackball to the SetVolLabel1 button and press Select .
The message Media Label set to TEST_LABEL2 is displayed.
13) Trackball to the GetVolInfo button and press Select .
The message Media in drive H has following properties: Media Label = TEST_LABEL2,
Media File-System Name = CDUDF is displayed.
14) Trackball to the FlushVol button and press Select .
The message The cached data is flushed to the volume in drive H is displayed.
15) Trackball to the Exit button and press Select .